Matchless
Enterprises
Manufacturers of Spare Parts and Assemblies for Textile Industries
Rotary Atomizer
Atomizer is used in a Spray Drying plant to convert Liquid to Powder. For eg. Milk to Milk powder. It is a high-speed machine requiring careful handling and regular maintenance.
 |
Technical Specifications of AT 80 - Laboratory Model
a) Mounting Plate - 300mm OD x 10mm thick. b) Height of Atomizer - Top plate top to wheel top - 330mm. c) Wheel diameter - 80mm with 8 holes of 4mm OD. d) Shaft speeds - 24000, 22000, and 20000 rpm to be achieved by changing the shaft pulley.
|
Technical Specifications of AT 100 -
a) Mounting Plate - 300mm OD x 10 mm thick with motor extension of about 80 mm from one side. If Atomizer is lowered in chamber then Cavity in chamber should be min.470 mm. b) Height of Atomizer - top plate top to wheel top - 350 mm. c) Wheel diameter - 100 mm with 24 slots or with 8 holes of 4 mm. d) Shaft speeds – 20000, 18000 and 15000 rpm to be achieved by changing the shaft pulley. |
| Technical Specifications of
AT 120 -
a) Mounting Plate - 350mm OD x 12mm thick with motor extension of about 100mm from one side. b) Height of Atomizer - top
plate top to
wheel top - 494 mm c) Wheel
diameter - 120 mm with 24 slots
or with 8 holes of 4 mm d) Shaft speeds - 12000, 14000 and 16000 rpm achieved by changing the shaft pulley.
|
Technical Specifications of AT 160 -
a) Mounting Plate – 450mm OD x 12 mm thick with motor extension of about 100 mm from one side. b) Height of Atomizer – top plate top to wheel top – 760 mm c) Wheel diameter – 160 mm with 16 inserts/12 inserts/8 inserts having 5 mm ID holes or Venned wheel having 16 or 24 slots of 6 mm wide x 8 mm deep. d) Shaft speeds – 12,000, 14,000 and 16,000 rpm to be achieved by changing the shaft pulley. |
Technical Specifications of AT 250 -
a) Mounting Plate – 550mm OD x 12 mm thick with motor extension of about 100 mm from one side. b) Height of Atomizer – top plate top to wheel top – 820 mm c) Wheel diameter – 250 mm with 16 inserts having 6 mm ID holes d) Shaft speeds – 8000, 10000 and 12000 rpm to be achieved by changing the shaft pulley.
|